Product Specifications

Library Table   # 1271780700

Product Description:
Round library table 42"in diameter, 29" high with solid oak edging and legs. Tabletop has inlayed plastic laminate.

Materials:

Lumber: All exposed wood shall be Northern Red Oak free from all detrimental defects and selected in uniform grade and color. Air and kiln dried to final moisture content of 5 to 6%. This material will then be allowed to condition a minimum of 30 days before machining.

Cores: All cores are to be Type 1, Grade B, Class 2 panels and shall have a medium density of 35 to 50 lbs./cubic foot.  All specifications will follow the guidelines outlined by the National Particle Board Association specification AMST-D-1037-63T.

Veneer:  Exposed veneers shall be Grade "A" plain-sliced Red Oak not less than 1/28" thick.  Face veneers shall be free from splits, patches and detrimental defects.

High pressure laminates:  Laminate material shall be .039 to .050" thick and will meet NEMA LD3 standards. Backing sheet not less than .020" shall be used where appropriate.

Finishing:  Three-step process incorporating oil based stain to specified color, Power Process Opticlear Pre-Catalyzed 25 degree lacquer sanding sealer and topcoat 30-35 sheen. All parts sanded between coats.

Hardware:  1 1/8" ¼-20 GI-643-411-081 Levelers. ¼-20 TN106SB8 Leveler Insert.  CN-3622 Polished Brass Leg Brace.

Component Specifications:

Tabletop shall be 1 1/8" 45 lb. Particleboard substrate with laminate backer sheet on underside and high-pressure plastic laminate on the top. Laminate shall match in color and grain pattern to the stained or natural finish of the solid oak components.  Tabletop shall be banded with a 1¾" x 1¾" solid red oak edge, glued and blind splined to the substrate, and rounded to a full radius.

Legs are 2¼" x 2¼" solid oak and are attached to the underside of the tabletop. Hardware includes floor levelers and polished brass leg supports.