Product Specifications

Library Starter/Single-Faced   # 1274412000

Product Description:
Starter & Add Bookcase Section. 84" High starter unit, single faced, with two finished ends, one top, one bottom, and five adjustable shelves.

Materials: 

Lumber: All exposed wood shall be Northern Red Oak free from all detrimental defects and selected in uniform grade and color. Air and kiln dried to final moisture content of 5 to 6%. This material will then be allowed to condition a minimum of 30 days before machining.

Cores: All cores are to be Type 1, Grade B, Class 2 panels and shall have a medium density of 35 to 50 lbs./cubic foot.  All specifications will follow the guidelines outlined by the National Particle Board Association specification AMST-D-1037-63T.

Veneer:  Exposed veneers shall be Grade "A" plain-sliced Red Oak not less than 1/28" thick.  Face veneers shall be free from splits, patches and detrimental defects.

High pressure laminates:  Laminate material shall be .050" thick and will meet NEMA LD3 standards. Backing sheet not less than .020" shall be used where appropriate.

Finishing:  Three-step process incorporating oil based stain to specified color, Power Process Opticlear Pre-Catalyzed 25 degree lacquer sanding sealer and topcoat 30-35 sheen. All parts sanded between coats.

Hardware:  CM300-z2-zz Camar Leveler.  H262.50.313PM Keku Fastener.  KV 255 BRN Shelf Standards.  KV 256 BRN Shelf Clips.

Component Specifications:

Top is ¾" thick oak veneer MDF with two 2¾" wide solid oak rails rabbeted to the front edges.

Bottom is ¾" thick oak veneer MDF with two 5¼" wide solid oak rails rabbeted to the front edges. Four access holes allow levelers to be adjusted after assembly.

Finished end panel is 1" thick oak veneer MDF with ¼" solid oak edging on vertical surfaces and ½" solid oak edging on the top.  Inside surface is dadoed to accept metal shelf standards for a flush application.

Shelves are 1" thick, 12" wide oak veneer MDF banded on two sides with ¼" solid oak edging. The bottom surface is machined to recess shelf clips 1/8"deep.