Product Specifications

Library Book Case   # 1271712800

Product Description:
Freestanding bookcase, 72" wide, 84" high, and 12" deep with a finished back. Ten shelves are adjustable in ½" increments.

Materials:

Lumber: All exposed wood shall be Northern Red Oak free from all detrimental defects and selected in uniform grade and color. Air and kiln dried to final moisture content of 5 to 6%. This material will then be allowed to condition a minimum of 30 days before machining.

Cores: All cores are to be Type 1, Grade B, Class 2 panels and shall have a medium density of 35 to 50 lbs./cubic foot.  All specifications will follow the guidelines outlined by the National Particle Board Association specification AMST-D-1037-63T.

Veneer:  Exposed veneers shall be Grade "A" plain-sliced Red Oak not less than 1/28" thick.  Face veneers shall be free from splits, patches and detrimental defects.

High pressure laminates:  Laminate material shall be .050" thick and will meet NEMA LD3 standards. Backing sheet not less than .020" shall be used where appropriate.

Finishing:  Three-step process incorporating oil based stain to specified color, Power Process Opticlear Pre-Catalyzed 25 degree lacquer sanding sealer and topcoat 30-35 sheen. All parts sanded between coats.

Hardware:  1 1/8" ¼-20 GI-643-411-081 Levelers. ¼-20 TN106SB8 Leveler Insert.  KV 255 BRN Shelf Standards.  KV 256 BRN Shelf Clips.

Component Specifications:

Top is ¾" thick oak veneer MDF with a 2 ¾" solid oak rail rabbeted to the front edge. Top surface is covered with high-pressure plastic laminate.

Bottom is ¾" thick oak veneer MDF with a 2 ¾" solid oak rail rabbeted to the front edge.

Sides are 1" thick, oak veneer MDF banded with ¼" solid oak on vertical sides and ½" solid oak on the top edge. Interior of sides are dadoed to accept metal shelf standards for a flush application.

Divider is 1" thick oak veneer MDF banded with ¼" solid oak on front vertical edge. Both sides are dadoed to accept metal shelf standards for a flush application.

Back is ¾" thick oak veneer MDF finished on both sides.

Shelves are 1" thick 12" wide, oak veneer MDF banded on two sides with ¼" solid oak edging. The bottom surface is machined to recess shelf clips 1/8"deep.